I wanted to know Validity period in number of Days for License installed on my SQL Server 2008 R2 server.
Help is highly appreciated.
Microsoft
I wanted to know Validity period in number of Days for License installed on my SQL Server 2008 R2 server.
Help is highly appreciated.
Microsoft
I have installed SQL 2012 with SP1 on Windows 2012. I am trying to enable Lock Pages in Memory. Following the steps from this article (http://msdn.microsoft.com/en-us/library/ms190730.aspx), I attempted to add the domain account I have running SQL Server Service in the GPEdit.msc, but receive the following error:
_______________________
Security Templates
An extended error has occurred. Failed to save Local Policy Database.
_______________________
Can someone tell me why this might be the case? Could there be a domain GPO or other security preventing this registration?
As a side note, I had a similar issue with SQL 2008R2. However, in that case, I added the domain account to the 'local' group 'SQLServerMSSQLUser$Servername$InstanceName', then I added that group to the Locked Pages instead. It was a work around, but it worked. In SQL 2012, this group no longer exists. What could be preventing the registration of the domain account in the Locked Pages 'add user or group' interface?
Thanks
we have 2 node active - passive cluster is exist . we are planning to add sql Instance on that existing cluster. looking for step by step process and requirement if anyone has worked on this kind of task.
It will require additional resources ?
you help greatly appreciated
Thank you
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach A.Shah
Hi
I installed Sql Server 2012 Evaluation Edition.
After I downgraded it back to a properly-licensed Standard edition the Analysis Services service would not start, complaining:
"MSSQLServerOLAPService: “The service cannot be started: … The 'Analysis Services in Tabular Mode' feature is not included in the '64 Bit Standard' edition of Analysis Services"
I can understand what this is telling me, and I see that Tabular Model is not part of Standard Edition.
My question is this:
Is there something I can do to remove the unlicensed features, or do I need to uninstall and reinstall the whole kit and caboodle?
Thanks
jim
the problem is
"previous release of microsoft visual studio 2008" failed.
how to solve this problem. I had already vs2008 installed on my pc.
Hello Friends,
what is the difference between sql server 2008 R2 Enterprise andsql server 2008 R2 Standard edition?
Currently we are using sql server 2008 R2 enterprise and we are going to update it by sql server 2008 R2 standard edition.
what will be the problems arise if we are updating by standard edition?
Please give me reply ASAP.
Thank You,
Sonal Patel
Hi,
Can some one give me the list of new features available in sql server 2008 SP3 .
All my servers are in sql 2008 SP2, where in i need to upgrade, before which i should know the new features available , so tha ti can project this to business and seek the approval..
Also , will there be any impact while upgrading SP3 (sql 2008) .
Thank you
Hemadribabu
hemadri
Hello,
I am Manikumar, I am using Windows 8 Pro edition and i want install SQL Server 2012 RTM Version in my pc so my system configuration ,i have mentioned below
Processor: AMD Althon(tm) 64 X2 Dual Core Processor
RAM: 1 gb
System Type : 32 bit os
So I just want to know ,what are prerequisites and how to installations process,please tell me.I wnat to install immediately.
Thank You
When I install SQL Server 2012 + SSAS,SSIS and SSRS the installation also creates a folder C:\Windows\System32\inetsrv\config with applicationHost.config file. This is being flagged by our security scanning software, that there is a mis configured default website. I was wondering if it is safe to delete \config folder and it's contents as we are not planning on using the IIS server on SQL server machine.
Will SQL Server 2012 Dev. Ed. work on Small Business Server Standard 2011?
Thank youi
Brian Geregach
Hello all , i am installing Sql server 2012 with windows server 2012
, i am facing issue with the below details
Sql server fail to download product update with result faild Error code 0x80246002.
this may indicate that windows update service has no online access to the microsoft access server or windows update server services .
please guide me on the same.
Bhrugujani
Hello experts,
I have a SQL Server 2005 Instance running on "Windows Server Enterprise without Hyper-v" OS (this is the operating system name showing in the my computer properties) now i want to install another instance of SQL Server 2008 SP1 on the same server.
I have different disk drives available for data,log and temp files. Basically this instance will be used for mirroring with another SQL Server 2008 SP1 (with .Net framework 4.5) running on Windows Server 2008 Enterprise .
Could you please provide your suggestion/ experience on the following questions,
-->Does the installation of MS SQL Server 2008 SP1 is supported on "Windows Server Enterprise without Hyper-v" OS?
-->Installation of MS SQL Server 2008 and MS SQL Server 2005 side by side is supported on "Windows Server Enterprise without Hyper-v" OS?
-->If Yes, which version of .Netframe work should I use, (.Net 3.5SP1 or 4.5)
-->If I use Net 3.5 SP1 Framework does it have any impact when I do mirroring with my principle SQL Server 2008 SP1 (with .Net framework 4.5)
--> Also during/after the installation does it requires any system reboot?
regards,
Jakk
I have an instance of SQL Server 2008 R2 installed for use with SCCM 2012 which is installed on a separate server.
The TCP ports were all set to static ports for the instance before the installation of SCCM.
After SCCM 2012 installation the IP of the SQL Server was changed. There's a need to change the port the SCCM 2012 SQL instance is listening on. I've tried to change the static port to a different port number, but each time I restart the SQL Services for the instance so that the port changes can take effect, I return back to the TCP/Ip configuration page only to find that all the other changes I made are committed with the exception of the IPAll port that reverts back to the old static port that I set before I installed SCCM. Also the second IP reflects the old IP Address that existed before the change even after i manually changed it in that section. All other parameters that i change otherwise don't revert back.
I need assistance resolving this issue. Thank You
Hello ,
I hope you can help me to fix this issue, it's been 5 days since I a, trying to configure VPN in your 2008 and 2012 Servers. On both platform (2008 and 2012) I am getting same error while configuring VPN (after role installation).
"Unable to load C:\Windows\System32\iprtrmgr.dll". So, I have removed IPv 6 entry from the registry and now able to start server (not sure what configuration it took automatically). I tried to disable "Routing and Remote Access" service and got the same error while enabling "Routing and Remote Access" is running but VPN is still not functioning properly).
I am getting following error,
================================================
Errors under the Event viewer (Remote access)
----------------------------------------------------------
1) --->> CoId={DF744409-02D7-4FF4-AD24-504F0C83E1AB}: The user 10.0.0.1\chetan connected from 10.0.0.1 but failed an authentication attempt due to the following reason: The remote connection was denied because the user name and password combination you provided is not recognized, or the selected authentication protocol is not permitted on the remote access server.
2) ----->> CoId={DF744409-02D7-4FF4-AD24-504F0C83E1AB}: The user connected to port VPN3-127 has been disconnected because the authentication process did not complete within the required amount of time.
Errors under the Event viewer (Remote access)
3) ---->> Network Policy Server denied access to a user.
Contact the Network Policy Server administrator for more information.================================================
I am using (MS-CHAP v2) + EAP (Authentication Method). Please let me know if you need any additional information.
Thank you,
hi all,
i have gone through the thread which had the same subject but still it didn't work out..
i have even removed SQL 2005 install bits using msicuu2.exe but still i can find SQL 2005 in my programs list in start menu....
Can anyone please let me know how i can remove SQL 2005 completely when it does not show up in Add/Remove programs and WindowsInstaller Cleanup Tool but i can still find it if i navigate to Start --> All programs --> Microsoft SQL Server 2005......
regards,
Hi,
We have bought 5 licenses of SQL server developer 2012.
This licenses provided us an option to use SQL server 2008 R2. And we have been using 2008 R2 till now.
But now we want to upgrade to SQL server developer 2012 edition
I want to know the process for up-gradation. When I looked at the licensing portal, it says "This product does not require a product key"
My questions are:
1) Should I download the 2012 version from licensing center and pass the downloaded copy to respective team members?
2) Can the team member download the SQL server 2012 developer edition from Microsoft site and install it on their machines?
3) Do we need to first un-install 2008 R2?
4) How the licensing can be managed in cases of products which say "This product does not require a product key.", i.e. how can I make sure that no more than 5 installations are done by the team
Thanks
Strange problem that I've been chasing all day:
Relational DB and SSAS are installed on the same server.
OLAP database has connection string to local SQL database.
Processing the OLAP database results in the usual flurry of error messages and events in the Windows Application event log with the key phrase "Client unable to establish connection; 08001; Encryption not supported on the client.; 08001."
There's a lot of FUD and hearsay on the internet about this error, most "solutions" recommend changing the connection string to use a different provider. I've tried the SqlClient managed provider, the SQL Native Client, the "Microsoft OLE DB for Sql Server" provider and all fail similarly when processing the cube, and all succeed when testing the connection interactively.
The one thing that DID make a difference? I changed the service identity for SSAS from NT Service\MSOLAPServer (or whatever the default virtual account is) to a specific domain user and magically all problems went away. Keep in mind, the data source is set up to impersonate, not use the service identity, so why changing this made any difference is a mystery.
Any ideas? I'd like to get to the bottom of this because it's come up several times on several different systems and it's always a research project to find a configuration that actually works.
-cd Mark the best replies as answers!